MATERIAL SAFETY DATA SHEET

1/1/[DateTime:Now|yyyy]
Product Identity: KDF

Section I - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME:  KDF
CHEMICAL FAMILY: Metal Alloy Powder    CAS NO.:   See Below      
FORMULA:   Cu/Zn
           
DOT HAZARD CLASS: Not listed   UN NO:  NAIF*
  NA NO NAIF*
ISSUE DATE:   03/15/88
  REVISION DATE: 02/17/06      
MANUFACTURE:  KDF FLUID TREATMENT, INC   SUPPLIER: CEI CARBON ENTERPRISES INC
ADDRESS: 1500 KDF Drive   ADDRESS: 28205 Scippo Creek Rd
  Three Rivers, MI 49093     Circleville, OH 43113
      TELEPHONE NUMBER:     800-344-5770
      FAX NUMBER: 888-204-9656
TRANSPORTATION EMERGENCY:  CHEMTREC: 800-424-9300
Section II - COMPOSITION/INFORMATION ON INGREDIENTS
INGREDIENT   %   EC NUMBER   CAS NO. 
Copper   48-52
231-159-6   7440-50-8
Zinc   48-52   236-671-3   7440-66-6
Section III - HAZARD IDENTIFICATION
CLASSIFICATION SYSTEM: 
The classification is based on the criteria in the UN Globally Harmonized System of Classification and Labeling of Chemicals (GHS).
GHS LABEL ELEMENTS WARNING 
Causes serious eye irritation
May cause respiratory irritation
PREVENTION: 
Avoid breathing dust
Use only outdoors or in a well-ventilated area
Wash hands thoroughly after handling
Wear protective gloves/protective clothing/eye protection/face protection
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing
Call a POISON CENTER or doctor/physician if you feel unwell
IF IN EYES: Rinse cautiously with water for several minutes.  Remove contact lenses if present and easy to do - continue rinsing
If eye irritation persists get medical advice/attention
DISPOSAL:
Dispose of contents/container in accordance with local/national/international regulations.
Section IV - FIRST AID MEASURES
INHALATION:    Remove to fresh air.  Lay patient down. Cover with blanket.
INGESTION:   Give 200 - 300 ml water to drink.  DO NOT induce vomiting.
SKIN CONTACT:   For skin exposure, remove contaminated clothing and wash with soap and water.
EYE CONTACT:   If irritated, flush eyes and skin with large volumes of fresh water for 15 minutes.
MEDICAL NOTES:   If any adverse symptoms persist seek immediate medical attention.
Section V - FIRE FIGHTING MEASURES
Extinguishing Media:   CO2, ABC extinguisher, or water spray.
Special Fire Fighting Procedures:   Material is non-flammable.  Use firefighting measures appropriate to surrounding materials.
Personal Protective Equipment:    Wear self-contained breathing apparatus
Section VI - ACCIDENTAL RELEASE MEASURES
Personal Precautions:    Spilled material may produce dust hazard if not handled correctly.  Wear appropriate personal protective equipment: coveralls, gloves & eye protection.
Methods for Clean up:   Contain spillages and clean up with vacuum or conventional tools and attempt to minimize dusting.  Place in a suitable container for recycling or disposal in accordance with local and national waste regulations.
Method of Disposal:   Place in a suitable container for recycling or disposal in accordance with local, state and/or federal regulations.
Section VII - HANDLING AND STORAGE
Handling:  Only use in a well-ventilated area and prevent the creation of dusts.  If concentrations exceed the occupational exposure limits, use suitable respiratory protection.
Storage: Store in a cool, dry, well-ventilated place.  Keep away from food, drink and animal feeding stuffs.  Keep lids of container tightly sealed.  
Section VIII - EXPOSURE CONTROL/PERSONAL PROTECTION
Occupational Exposure Standards: 8-hour TWA
  1.  Copper Powder as dust and mist
       OSHA PEL: 1 mg/m3 and ACGIH TLV: 1 mg/m3
  2.  Zinc Powder as dusts
       OSHA PEL: 10 mg/m3 8-hour TWA and ACGIH-TVL: 10 gm/m3 8-hour TWA
Occupational Exposure Controls: All personal protective equipment, including respiratory equipment, used to control exposure to hazardous substances must be selected to meet the requirements of national personal protective equipment regulations.  
Ventilation: To keep below the U.S.A. OSHA and EU exposure limits, use general dilution type ventilation.
Personal Protection   
Respiratory Protection: Cartridge type particulate filter respirator or dust-mask conforming to U.S.A. NIOSH.  Refer to Respiratory Protective Devices approved by NIOSH under 42 CFR 84 and the appropriate European standard.
Hand Protection: Wear if skin contact is probable and skin is sensitive.
Eye Protection: Safety glasses or goggles.
Skin Protection: Long sleeve shirt(s) if contact is probable and skin is sensitive.
Environmental Protection:  Do not allow to enter drains or watercourses.
Section IX - PHYSICAL AND CHEMICAL PROPERTIES
Appearance:  Purplish to Yellow in Color  Odor: None
       
  Copper Zinc  
Boiling Point: 2567ºC 1665ºC  
Melting Point: 1083ºC 419ºC  
Specific Gravity: 8.94 7.14  
Vapor Pressure: N/A N/A  
Vapor Density: N/A N/A  
Evaporation Rate: N/A N/A  
Solubility in water: Insoluble Insoluble  
Volatile by Volume, %: 0 0  
Molecular Weight: 63.54 65.37  
Section X - STABILITY AND REACTIVITY
Stable  x
Unstable  
Conditions & Materials to Avoid:
        · Temperatures above 100ºC while in the presence of moist air.
Hazardous Decomposition Products:   Metal fumes will be released if heated above the elements melting point
Hazardous Polymerization: Will Not Occur
Section XI - TOXICOLOGICAL INFORMATION
Signs, symptoms, and effect of over exposure: 
Eyes: Redness, tearing, itching, burning and conjunctivitis
Ingestion: Irritation and burning sensations of mouth and throat, nausea, abdominal pain with possible diarrhea.
Inhalation: Irritation of the mucous membranes, coughing, wheezing, shortness of breath.  Prolonged exposure may cause metallic taste.
Acute Health Effects:
  This product is not listed by NTP, IARC or regulated as a carcinogen by OSHA.
Section XII - ECOLOGICAL INFORMATION
None Established
Section XIII - DISPOSAL CONSIDERATIONS
PACKAGING:  Dispose of in accordance with procedures applying to the disposal of the product
PRODUCT: Dispose of surplus and contaminated materials (including sawdust) at an approved landfill or in accordance with other national or regional provisions.
Section XIV - TRANSPORT INFORMATION
 US DOT: Not a hazardous material for transportation.  That it is not regulated, or not dangerous, or not hazardous, or not restricted for transport by air.
DOT regulations:   
Hazardous Class: None
Land transport ADR/RID (cross-border)
Hazardous Class: None
Maritime transport: IMDG:
Hazardous Class: None
Marine Pollutant: No
Section XV - REGULATORY INFORMATION
U.S. EPA EPCRA Section 313 Reportable Product - (contains copper) 
U.S. EPA Reportable Quantity:  5,000 lbs. (2,270 kg)
TSCA Inventory Status" (40 CFR 710) All formulation components are listed in the TSCA Inventory.
California Proposition 65: This product contains no chemicals which the State of California has found to cause Cancer, birth defects or other reproductive harm.


 



SECTION X - DISCLAIMER:


As the conditions or methods of use are beyond our control, we do not assume any responsibility and expressly disclaim an

SECTION X - DISCLAIMER:


As the conditions or methods of use are beyond our control, we do not assume any responsibility and expressly disclaim any liability for any use of this material.  Informati

SECTION X - DISCLAIMER:


As the conditions or methods of use are beyond our control, we do not assume any

Copyright 2013 by Carbon Enterprises, Inc.
Site created by BMC Developers, LLC.
Google+  Linkedin  Facebook